Home › Gates › Metal Frame Gates › Double Swing Gates

Double Swing Gates

Two wood gate leaves on welded steel frames, built to your opening in our Lubbock shop for a driveway, an alley or a trailer. The steel frames keep the larger gate panels square, so they last. Buy the frames and hang them yourself, or have our crews build and hang the whole gate.

340 Google reviews in Lubbock and 98 in Midland, both averaging 4.7 stars.

15 ft
Double drive gate span

A double wood drive gate on a welded metal frame can span up to 15 feet.

7 ft
Without a metal frame

Past about 7 feet, an all-wood gate starts to rack and sag. The steel frame is what keeps a wide gate square.

3
Pickup locations

Frames are built to size in our Lubbock shop and can be picked up at any of our three Fence Supply Centers.

Built so the larger gate panels last

Most of our customers don’t need a double swing gate. When you do, the opening is wide, and each gate leaf is bigger and heavier than a walk gate. That’s where an all-wood gate fails: past about 7 feet it racks out of square under its own weight, the latch stops catching and the leaves start to drag.

A welded steel frame under each leaf holds the corners square, so the cedar pickets on the face are just the skin. On metal frames, a double wood drive gate can span up to 15 feet and stay square.

Double swing wood gate on a galvanized steel frame in a 6-foot dog-ear cedar fence
Double swing gate on a galvanized steel frame, in a 6-foot dog-ear cedar fence.
Board-on-board double swing gate on a metal frame across a driveway
Board-on-board double swing gate across a driveway.

Where a double swing gate fits

Two gate leaves meet in the middle and swing open, so a double swing gate covers an opening too wide for one leaf: a driveway, an alley or a trailer.

We build the leaves on the frames to match your fence picket for picket, whether it’s dog ear, gothic point, flat top with a decorative cap or board on board.

Two ways to get your gate

Do-It-Yourself

Buy the frame and hang it yourself

Give us the opening width post to post, the gate height, which way it swings and whether it’s a single or double gate. Our shop welds the frame to your measurement, and you pick it up at the Fence Supply Center closest to you. Hinges, latches, drop rods and gate wheels are at the same counter, and a wood gate hardware kit starts at $30.80 (October 2026 price).

Gates & gate hardware →

Installed

Let our crews build and hang it

Our crews set heavy 2-3/8-inch Schedule 40 steel posts 3 feet deep in concrete, build the wood gate on the metal frame to match your fence picket for picket, and hang it so it keeps closing true. Every gate is priced after we see the opening.

Get a free estimate →

Cedar gate built on a welded steel frame, hung on a galvanized post
Cedar gate on a welded steel frame, hung on a galvanized post.

Hung on posts built for a gate

On a wood fence, every post we set is the same heavy steel post: 2-3/8-inch Schedule 40, set 3 feet deep in concrete. For a double gate over 12 feet, each leaf hangs on a larger 2-7/8-inch Schedule 40 post.

  • Bull dog hinges bolted to the post, with the frame clamped and bolted to the hinge
  • A welded truss rod on each leaf, to adjust its height so the leaves meet level in the middle
  • No gate wheel needed with heavy posts and bull dog hinges
  • A heavy-duty drop bar with guides that locks the gate closed

Thinking about automating it? We install LiftMaster gate operators on gates we build.

Need a gate for foot traffic?

Most fences only need a single walk-in gate: one leaf for walking through the fence, built on the same welded steel frame. Single Walk-in Gates →

All metal frame gates for wood fences →

Order at the Fence Supply Center closest to you

Lubbock Fence Supply Center

12116 Slide Rd
Lubbock, TX 79424
(806) 799-3729
Mon–Fri 7:30 am – 5:30 pm
Sat 8:00 am – 1:00 pm

Amarillo & Canyon Fence Supply Center

16500 I-27
Canyon, TX 79015
(806) 655-5700
Mon–Fri 7:30 am – 5:30 pm
On I-27 at Rockwell Road, between Amarillo and Canyon

Midland & Odessa Fence Supply Center

10200 TX-191
Midland, TX 79707
(432) 563-1111
Mon–Fri 7:30 am – 5:30 pm
On Highway 191 between Midland and Odessa

Get a gate estimate

Send the address, the opening width and the style of your fence. A photo of the opening helps. Buying the frame only? Call the counter with your measurements.

Questions

How wide can a double swing gate be?

On welded metal frames, a double wood drive gate can span up to 15 feet. Without a metal frame, a wood gate is limited to about 7 feet.

Do I need a double swing gate?

Most of our customers don’t. A single walk-in gate handles foot traffic. A double swing gate is for an opening too wide for one leaf, like a driveway, an alley or a trailer.

Why does a wide wood gate sag?

A gate sags for three reasons: the hinge-side post leans, the gate frame racks out of square under its own weight, or the hinges are too light for the gate. A metal frame keeps a wide gate square, and bull dog hinges bolted to a heavy steel post set 3 feet deep in concrete keep it from leaning.

Can you automate a double swing gate?

Yes. We install LiftMaster gate operators on gates we build and on existing gates that are sound and move freely.

What do I need to tell you to order double gate frames?

The opening width post to post, the gate height, whether the gate swings in or out, and whether both leaves open.